SPX OTC 7448 Fueljector Cleaner Owners Manual - 1 of 4
SPX OTC 7448 Fueljector Cleaner Owners Manual - 2 of 4
SPX OTC 7448 Fueljector Cleaner Owners Manual - 3 of 4
SPX OTC 7448 Fueljector Cleaner Owners Manual - 4 of 4
From inside (document excerpt):
Form No. 107340 Parts List & Operating Instructions for: 7448 Fuel Injector Cleaner Part No. 208389 19463 517145 313575 47955 213299 15373 16494 309796 Qty. 1 1 2 Description Valve Tee Fitting Rubber Gauge Cover Pressure Gauge (0-100 PSI / 0-7 BAR) Cylinder Body Air Regulator 90° Elbow Fitting Straight Fitting (1/ 4 NPTF) Cylinder Cap Item No.
Power Tool User Manual Free Download. HAVC Operator’s Manual. Auto AC Lift Power Free Instruction Manual Download PDF.
Part No. 213209 Qty. 2 Description O-ring (211/16 x 21/2 x 3/32, -144) 7 10473 6 / 8 ” Sash Chain 213876 1 Split Ring 15665 1 “S ” Hook 206878 1 Coupler Socket 306905 1 Hose (1/8 NPTF x 6′ Lg.) 17022 1 Straight Fitting 216297 1 Check Valve 313576 1 Decal Parts Included but Not Shown 106103 1 Instruction Manual Sheet No. 1 of 2 Rev. B, 6-2-03 SPX Corporation Issue Date: Parts List & Operating Instructions Form No. 107340, Sheet 1 of 2, Back Safety Precautions WARNING: The following safety precautions must be carefully observed to help reduce the risk of fire and personal injury. · Read and understand the operating instructions and safety precautions before using the Fuel Injector Cleaner. If the operator cannot read English, operating instructions and safety precautions must be read and discussed in the operator’s native language. Si el operador no puede leer el inglés, las instrucciones de operación y las precauciones de seguridad deberán leerse y comentarse en el idioma nativo del operador. Si l’utilisateur ne peut lire l’anglais, les instructions et les consignes de sécurité doivent lui être expliquées dans sa langue maternelle. Wear eye protection that meets ANSI Z87.1 and OSHA requirements. Tighten all connections before cleaning injectors; fuel leakage could cause a fire. Release fuel system pressure before servicing fuel system components. To avoid spilling fuel on the engine, wrap a shop towel around pressure tap fittings when connecting or disconnecting adapters. Pressurized fuel can create a fire hazard. Dispose of the shop towel correctly. Keep dirt out of the system. Use the vehicle manufacturer’s recommended procedures to service injectors. Never exceed recommended pressures when cleaning fuel injectors. Replace injector o-rings whenever injectors are removed. Use the Fuel Injector Cleaner on gasoline engines only. · · Protect painted surfaces from fuel or cleaner fluid spills. Keep tools, electrical cords, and hoses away from moving engine parts. Vent exhaust to the outside while running the vehicle. Wrap a shop towel around the fitting when removing the cleaner assembly hose. Residual line pressure may spray a small amount of cleaner fluid. Observe normal precautions for working with flammable liquids: no smoking, open flames, electrical sparks, etc. Have a Class B fire extinguisher available while working on fuel injection systems. Do not modify any components of the Fuel Injector Cleaner. Do not replace any components of the Fuel Injector Cleaner except those specified by the manufacturer. Refer to any operating instructions included with the product for detailed information about operation, testing, disassembly, reassembly, and preventive maintenance. Items found in this parts list have been carefully tested and selected by OTC. Therefore: Use only OTC replacement parts! Additional questions can be directed to the OTC Technical Services Department. Parts List & Operating Instructions Cleaning the Fuel Injectors Refer to the Fuel Injection System Specifications manual (#106103), which is included in the #7448 kit. The manual contains diagrams and instructions specific to each vehicle system. 1. Read, understand, and follow “Safety Precautions ” before using Fuel Injector Cleaner.