SPX OTC 1513A 1515A Collision Repair Set Owners Manual - Enlarge page 1 of 15
2 of 15
3 of 15
4 of 15
5 of 15
6 of 15
7 of 15
8 of 15
9 of 15
10 of 15
11 of 15
12 of 15
13 of 15
14 of 15
15 of 15
From inside (document excerpt):
Form No. 106496 Parts List & Operating Instructions for: 1513A 1515A Collision Repair Set No. 1513A 4-Ton Set Item No. Part No. 222524 9104A 222618 9106A 222523 9101A 222520 222519 222517 222521 222518 222522 222516 222515 222512 222513 222514 504888 Description Storage Case Ram w/Half Coupler 6 ft. Hose w/Male 1/4 ” NPT Fittings Hydraulic Hand Pump Flex Head 3 Spreader w/Ram Half Coupler 2 Wedge Head 90° V-base Serrated Saddle 5 Plunger Toe Flat Base Spreader Toe (11/2 “-16) 6 Extension Tube Coupling 4 ” Extension 16 ” Extension 12 ” Extension 13 8 ” Extension 1/4 ” Hose Half Coupler (not shown) 1 4 7 8 9 10 11 12 15 16 17 14 No.
Power Tool User Manual Free Download. HAVC Operator’s Manual. Auto AC Lift Power Free Instruction Manual Download PDF.
1515A 10-Ton Set Item No. 11 12 13 14 15 16 17 Part No. 222538 9110A 222618 9107A 222537 9101A 222534 222533 222531 222535 222532 222536 222530 222529 222526 222527 222528 504888 512702 SPX Corporation Description Storage Case Ram w/Half Coupler 6 ft. Hose w/Male 1/4 ” NPT Fittings Hydraulic Hand Pump Flex Head Spreader w/Ram Half Coupler Wedge Head 90° V-base Serrated Saddle Plunger Toe Flat Base Spreader Toe (21/4 “-14) Extension Tube Coupling 5 ” Extension 19 ” Extension 14 ” Extension 10 ” Extension 1/4 ” Hose Half Coupler (not shown) Wheel/Axle Kit (not shown) Part No. 9104A 9106A 9107A 9110A Seal Kit 222624 222623 222622 222625 Shaded area indicates last revision made to this form. Added Translations Sheet No. Issue Date: 1 of 3 Rev. D 10-22-04 Parts List & Operating Instructions Form No. 106496, Sheet 1 of 3, Back Safety Precautions CAUTION: Failure to heed the following precautions may result in loss of load, damage or failure of equipment, resulting in property damage and / or personal injury. Read, understand, and follow all safety precautions and instructions included with the set. If the operator cannot read English, operating instructions and safety precautions must be read and discussed in the operator’s native language. The owner of this set is responsible for it being installed and operated according to federal (OSHA), state, and local safety standards. Safety-related decals must be installed, maintained, and replaced if they become hard to read. Wear eye protection that meets ANSI Z87.1 and OSHA standards. This equipment is designed for vehicle body / frame applications. Using this equipment in an application for which it is not designed could result in overloading, reduced load capacity, reduced stability, and / or system failure. Do not overload the hydraulic system; creating pressure beyond the rated capacity of the pump and ram may result in personal injury. Overloading is indicated by bowing extension tubes or slipping attachments. Some components in this set do not match the maximum pressure rating of the pump and ram. USE A PRESSURE GAUGE IN THE SYSTEM TO MONITOR HYDRAULIC PRESSURE. Refer to the instructions in this document for Typical Applications and Load Capacities. Attachments and extension tubes must be aligned and fully engaged so ram force is straight, avoiding an off center load condition.