From inside (document excerpt):
TM SUVs and Light Trucks Simply the most effective compressor for virtually any straight, conical, or offset spring. · Four-point locking jaws securely hold the · · spring in place. Open-ended design means you can take the strut in and out, quickly and easily. The arms adjust in and out, up and down, to accept many sizes of springs. (2-1/2 ” to 10 ” diameter) (2-1/2 ” to 24 ” vertical stroke) Extra long 3-bar handle gives user the leverage needed to compress the big strut springs.
Heating, Ventilating and Air Conditioning User Manual Free Download. HAVC Operator’s Manual. Auto AC Free Instruction Manual Download PDF.
No need to change shoes for different size springs. Easy to transport when mounted on optional stand (No. 6586 StrutTamer HD with stand; No. 6582 stand only. Comes with No. 6583 Bridge accessory to be used on springs that cannot be compressed enough to remove the retaining nut. No. 6583 · · No. 6586 Optional No. 6587 2:1 reduction gearbox. Allows a 2:1 torque compression increase when compressing struts. No. 6587 Thicker arms with 4-point locking jaws securely hold the larger springs in place. 800-533-6127 www.otctools.com OTC’s Heavy-Duty StrutTamer for SUV and Light Truck Strut Springs TM OTC’s StrutTamer HD for strut springs. This is simply the most effective compressor for handling virtually any straight, conical, or offset spring. With its adjustable arms and four-point locking jaws, the StrutTamer HD securely holds the spring in place. To keep the strut assembly straight during compression, we’ve developed a center screw that floats from side-to-side. This way the strut and spring remain aligned no matter what condition the spring is in. The StrutTamer HD also features an extra long 3-bar handle crank with the needed leverage to compress heavy-duty springs faster and easier. The StrutTamer HD can easily be mounted to the wall without the need for adapters, or you can choose the optional stand. The OTC StrutTamer HD stand features steel frame construction with two wheels that allow you to easily tilt the stand back and move the entire unit to the work area. The stand’s narrow design allows for easier mobility between vehicles in the shop. During compression, the wheels lift off the floor, and four no-slip rubber pads keep the stand firmly in place. Three-Bar Handle Four-Point Locking Jaws Thicker Adjustable Arms on Spherical Bearings Strut Spring Coverage 2-1/2 ” to 10 ” spring diameters 2-1/2 ” to 24 ” vertical stroke range No. 6585 StrutTamer HD strut spring compressor. Wt., 82 lbs. No. 6586 StrutTamer HD. Includes StrutTamer spring compressor and mobile stand. Wt., 150 lbs. No. 6582 StrutTamer stand. Wt., 68 lbs. No. 6583 Bridge accessory. No. 6587 Optional 2:1 reduction gearbox. Note: 6585, 6586 and 6587 can all be shipped UPS. No. 6585 StrutTamer HD Height 29 ” (736 mm) Width 21 ” (533 mm) Depth 20 ” (508 mm) No. 6586 StrutTamer HD with stand Height 54 ” (1372 mm) (36 ” without handle) Width 22-1/2 ” (572 mm) Depth 32 ” (813 mm) No. 6583 Bridge Accessory No. 6582 StrutTamer Stand Height 44 ” (1118 mm) Width 22-1/2 ” (572 mm) Depth 32 ” (813 mm) 08-39 2008 SPX, Because of ongoing product improvements, we reserve the right to change design, materials, and specifications without notice. Product shipped may differ from photo(s) shown. No. 6587 Optional 2:1 reduction gearbox. 800-533-6127 www.otctools.com …